SPH Std Joist Hanger (125mm)
£2.99
In stock!
Brand: Expamet BAT
Generic Ref: SPHS
Product Range: Builders Metalwork
Product Sub-range: Joist Hangers
Product Type: Masonry (built-in) Single Piece Hanger
European Standard/ETA: BS EN845-1:2013+A1:2016
Test Standard: BS EN 846-8:2000
Notified Body: Lucideon Ltd (NB 1289)
DoP Ref: EXP229CPR2013
Material: Galvanized Mild Steel DX51D+Z600 to EN10346:2015
Coating/Finish/Colour: 600g/m² Zinc Coating
Length 1/Projection: 75mm Shoe, 75mm Flange
Declared Loadbearing Capacity: 5kN SWL (SLS)
Fire Rating: Euroclass A1
Fixing Type: Built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist.
Installation requirement 1: Back of hanger must be tight against wall.
Installation requirement 2: Joists are to be cut square with a gap not exceeding 6mm from the rear of the hanger.
Installation requirement 3: A minimum 675mm of set masonry must be in place over support flange before loads are applied.
Installation requirement 4: Joist to be nailled through side gusset using 3.75x30mm square twisted nails.
Installation requirement 5: The underside of joists should be notched to provide a level surface for plasterboarding.
Options 1None
Standard UK Delivery is a charge of £10.00
Estimated delivery in three (3) to five (5) working days. (Please note, this excludes Weekends and Public/Bank Holidays).
Add an additional description to your product option. Ex: Size guides, and other common questions.
SPH Std Joist Hanger (125mm)
Penny Stock
Find More Products
Contact form
Got a question or just want to chat?